CEL-300 Series Convertible Dosimeters /Sound Meters and Noise Dose Badge

• personal noise dosimeter with integral microphone
• no cables to get tangled up
• measures everything for later analysis with dB35 software
• user selectable OSHA or ISO display mode for results during run
• up to 32 hours battery life from single charge
• NiMH battery pack with 90 min recharge from empty
• auto calibration to set level when calibrator applied to microphone
• up to 180 hours total memory time in up to 180 separate runs
• stores both Q=5 and Q=3 dose histograms so that anything can be calculated after download to pc
• time history profiling of 4 parameters
• selectable alarm for noise exposure exceedance warning
• lockable buttons for security during run
• variety of mounting clips provided as standard
• user selectable display languages from Eng, Fre, Ger, Ita or Spa
• ideal for multiple kits for medium to larger users

shown as CEL-350
(Click on image for more details)

Part # CEL-350 dBadge
micro noise dosimeter

• ANSI Type 2 accuracy
• convertible dosimeter and sound meter by simply exchanging microphone
• 30 to 140 dB measurement range in 3 overlapping 70dB spans
• Fast, Slow and Impulse time weightings plus separate peak channel
• A, C and Lin frequency weightings
• storage for up to 50 separate measurement runs (events)
• preconfigured with OSHA, MSHA, DoD, ACGIH, ISO85, ISO90 and METER setup protocols
• up to thirteen extra user definable measurement setups to allow customization of unit
• stores actual noise dose, 8 hour projected noise dose%, overall average level, maximum level, minimum level, peak level, 5 LN% levels
• two threshold levels settable between 70 and 90 dB
• single criterion level between 80 and 90 dB
• direct printing of preformatted reports to standard office printers
• available with setup and download Windows software for the PC
• upgradeable to CEL-360 Logging version by return to CEL service center

Part # CEL-320 dosimeter

• ANSI Type 2 accuracy
• convertible dosimeter and sound meter by simply exchanging microphone
• 30 to 140 dB measurement range in 3 overlapping 70dB spans
• Fast, Slow and Impulse time weightings plus separate peak channel
• A, C and Lin frequency weightings
• storage for up to 50 separate measurement runs (events)
• preconfigured with OSHA, MSHA, DoD, ACGIH, ISO85. ISO90 and METER setup protocols
• up to thirteen extra user definable measurement setups to allow customization of unit
• stores actual noise dose, 8 hour projected noise dose%, overall average level, maximum level, minimum level, peak level, 5 LN% levels
• two threshold levels settable between 70 and 90 dB
• single criterion level between 80 and 90 dB
• logs up to 10 parameters at user selectable intervals
• logging intervals from 1 sec to 1 hour
• total of more than 220,000 data point storage of logged results
• 16 sets of delay run timers up to a month in advance
• direct printing of preformatted reports to standard office printers
• available with setup and download Windows software for the PC

Shown as CEL-360
(Click on image for more details)

Part # CEL-360 logging dosimeter